Australia Australia  |
|---|
|
 |
Contact Us; Melbourne 03 9546-0533 Brisbane 07 3891-3344 Sydney 0424 198637 |
 |
oz_sales@takex.com |
PR-1 |
Reflective P.E. Beam |
||
|---|---|---|---|
 |
1m range indoors. Non polarity voltage. Reflector not required. N/O and N/C output. Adjustable response timer. Motionless objects can be detected. Cannot be knocked out of alignment. Very low profile. (pack of cards) Perfect for entry warning across shopfronts. |
||
 |
PR-5B |
Retro Reflective P.E. Beam |
||
|---|---|---|---|
 |
5m range indoors. Non polarity voltage. Very small reflector. N/O and N/C output. Adjustable response timer. Cannot be knocked out of alignment. Very low profile. (pack of cards) Perfect for entry warning across shopfronts. |
||
|
PB-10NS |
Flush Miniature P.E. Beam |
||
|---|---|---|---|
 |
10m range indoors. Sensor heads can be installed outdoors with processor located inside. 10m flying leads from heads. (can be cut to suit) Non polarity voltage. Adjustable response timer. N/O and N/C output. Reliable alternative to reed switches. Suits auto doors and ATM's. |
||
|
PB-10TNS |
TWIN Flush Miniature P.E. Beam |
||
|---|---|---|---|
 |
10m range indoors. Sensor heads can be installed outdoors with processor located inside. 10m flying leads from heads. (can be cut to suit) Non polarity voltage. Adjustable response timer. N/O and N/C output. AND/OR selectable. Reliable alternative to reed switches. Suits auto doors and boat alarms. |
||
|
PR-11B |
Reflective P.E. Beam |
||
|---|---|---|---|
 |
11m range outdoors, 15m range indoors. Cabling to one side only. Internally rotate head through 180 degrees. N/O & N/C output. Non polarity voltage input. Adjustable response timer. Tamper output. 50,000 lux external light rejection. (will not fail if hit by direct light) Perfect across driveways. |
||
|
IMPORTANT INFORMATION |
|||
|---|---|---|---|
If longer ranges are required for indoor applications, any TAKEX outdoor P.E. Beam will work perfectly indoors. |
Please note that P.E. Beams are rated at their outdoor ranges and will double their distance when used indoors. Therefore; if the distance of indoor detection is 100m, then a 50m P.E. Beam is required. |
| © 2008 TAKEX Australia. All rights reserved | PRIVACY STATEMENT |
